Wertymade RR10 Bomber Stainless Servo Winch Plate
RR10 Bomber Stainless Servo Winch Plate in 16ga Stainless steel.
You will need a 1/8" drill bit and basic tools.
Install the plate and install the 2 m3x10mm screws. For the front 2 screws, mark and remove bumper. (Pencil shows up well on the black plastic)
Drill the two marked holes out. Re-install the bumper. With the m3x16mm spacers and m3 lock nuts, bolt the plate to the bumper.
DO NOT OVER TIGHTEN BOLTS!
***Spacers are only needed for those that are using the stock servo mount.***
Mount up your fairlead hawse and choice of servo winch.